  |
Ladder
Innovation Headquarters - 24/7 Toll-Free Ordering: 1-888-811-1727
 |
 |
|
*Lower
48 U.S. States
† One copy of the "Safety Aspects" Training Video in your choice of format (CD-ROM or VHS) is available free by request with your first Leveler purchase. Call for details. Verizon, ComCast, Cablevision, Charter Communications, Cox Communications, Adelphia, Time Warner and Cynergy Power. These companies and others have all approved our LeveLok Leveling System - many based on the results of their own rigorous, in-house testing. Now
you can experience these levelers for yourself, for only
$109.97 USD per pair.
Why
is LeveLok the choice of major U.S. and Canadian companies?
In a nutshell, it's because our LeveLok® LL-STB-1 leveler and stabilizer is the ultimate in extension ladder accessories: Easy to use. Easy to install. Tough as nails. And an army of telecommunications companies, utility companies and governmental organizations have - through their own testing - come to know the LL-STB-1 as the safest ladder leveler on Planet Earth. The LL-STB-1 is easy to use. It enables virtually any fiberglass, aluminum or wood extension ladder to adapt to nearly any indoor or outdoor situation - from stairwells to uneven terrain on job sites. Its unique, patented design can be operated using only your foot - freeing your hands to hold the ladder. It is precision manufactured from high-strength 6061-T6 structural aluminum (the same material used to build commercial aircraft). And its patented "Anti-Trip" automatic safety lock exceeds every ANSI and OSHA requirement for ladders up to and including Type 1AA ladders with 375 pound duty ratings. LL-STB-1 levelers are quick and easy to install. (In fact, they can be installed with simple tools in less than 15 minutes.) If you prefer, they can be pre-installed at the ladder factory, or professionally installed by local ladder dealers and service companies, such as Advanced Ladders, Batavia Services, Inc., Industrial Ladder, Nationwide Ladders and Ladder Doctor (all specialists in serving utility companies). You can even have your Levelers pre-installed on the ladders you order (see above). With our ladder levelers, you can give your ladders sure footing in nearly any situation - in less than 5 seconds! Note: The LL-STB-1 is approved for installation on ladders up to and including Type 1AA (375 lb) duty ratings. All hardware and instructions for mounting the LL-STB-1 are included. From this page you can find complete details on the LL-STB-1 ladder leveler and stabilizer, from its unique features to specific benefits it offers your company. We have included a complete set of technical specifications, installation instructions and answers to frequently asked questions. Just click the appropriate button on the Leveler Detail Panel above. Note: The LeveLok stabilizer and leveling system consists of a pair of levelers, one for the right rail and one for the left. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| |
©1999-2009,
Levelok Corporation Last
revised November 12, 2009 |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
No
matter what your company does -- siding or roofing installation, painting,
maintenance or remodeling -- our Ladder Jacks make it a snap to set up a
safe and secure scaffold in nothing flat. Simply slide the rung mount over
the ladder rungs, slip in the pin and clip to lock the Ladder Jack into
place, and then level the platform body arm and lock it into place. Now
slip your plank onto the platform arm, and adjust the arm’s built-in end
stop to capture the plank. That’s all there is to it!
Our Ladder Jacks are super-strong, constructed with extruded aluminum. The Rung grips are both welded and riveted for extra strength. The result is a jack that’s rated for 250lb, Type I duty, and can be used with all Type I or Type IA extension ladders -- on either the inner or outer face.
The platform arm on each Ladder Jack has 9 possible positions, making it easy to level your planks. Two models are available, one to handle planks up to 18" wide (the LJ-SB-2) or 22" wide (the LJ-LB-3). Both models include a built-in, adjustable end stop that captures the plank.
The body mounts to the ladder by slipping it over the ladder rungs. The LJ-SB-2 mounts to adjacent rungs (see the photo above); the LJ-LB-3 mounts on 3 rungs, giving it added stability for greater platform widths. Their unique non-jamming rung grips make our Ladder Jacks easier to remove and reposition. Once in place, the body locks in place with a pin and clip. And when it’s time to take down your scaffold, our Ladder Jacks fold flat for transport or storage.
| Model # | Description | Price |
| LJ-SB-2 | 2-Rung, Short Body Arm Ladder Jack - for plank widths up to 18" wide (Pair) | 94.97 |
| LJ-LB-3 | 3-Rung, Long Body Arm Ladder Jack - for plank widths up to 22" wide (Pair) | 108.97 |
| Top of page |
Are
you aware that bungee cords are the leading cause of eye loss each year?
It was certainly a surprise to us!
That's why we sought to develop a superior fastening alternative, and we found that alternative in Tiegrrr Straps.
These webbed polypropylene straps are extremely strong (the working load limit is 200 pounds, but the typical breaking strength is more than 1,200 pounds!). They're more durable and cost-effective than bungees. And unlike bungees, they don't stretch like a rubber band when tightened.
Tiegrrs
are quick and easy to use. The tapered iron ends make it easy to feed the
strap through the solid zinc, rustproof buckle. Slip, zip - you're done!
Thanks to their patented locking grip, our Tiegrrr Straps lock tightly and release safely. And best of all, the locking grip does its work without chewing up the strap. Whether you use them to fasten ladders to your trucks or lash pieces of equipment together, our Tiegrrr Straps will give you years of trouble-free service.
Quantity pricing available on request.
| Model # | Size | Color | Prices |
| TGR-3 | 3' | Blue | 6.00 |
| TGR-6 | 6' | Red | 6.70 |
| TGR-9 | 9' | Black | 7.40 |
| TGR-12 | 12' | Orange | 8.10 |
| TGR-15 | 15' | Green | 8.80 |
| TGR-18 | 18' | Gray | 9.50 |
| Top of page |
Having
to maneuver any large extension ladder can be a chore - until now,
that is!
This optional handle can be conveniently installed on the side of nearly any ladder, for the utmost in ergonomic comfort and safety. You can now carry your ladder like a suitcase! (And the handle doesn't limit the use of the ladder in any way.)
Installation of the Tuff-Grip handle is a snap. Simply determine the precise balance point of your ladder, then mount the Tuff-Grip handle at that spot.
To view a short movie on how easy a ladder can be carried with the Tuff-Grip Handle, click here.
Quantity pricing available on request.
| Model # | Description | Price |
| TGH-3 | Tuff-Grip Handle | 11.80 |
| Top of page |
If
you’re looking for a standout stabilizer that will fit in a smaller space
(and a smaller budget) than our STB series above, you’ll find it in our
aluminum Standout Brackets. Weighing in at only 1.5 lbs., these sturdy aluminum
brackets can be attached to most extension or sectional ladders with open
rungs by simply compressing the two bracket ends and slipping them into
the rung openings. They are held securely in place by the tension and the
angle on the bracket. To detach them, just compress and pull.
Once installed, our Standout Brackets will protect gutters and windows, spanning 12 inches beyond each side of your ladder, and providing a standoff distance of 12 inches.
Plus, the EPDM cushioned rubber foam that covers the bends provides a smooth, gripping surface that not only offers superior surface protection, but fights against side slippage as well.
| Model # | Description | Price |
| ST-ORS-3 | Open Rung Standout Bracket | 37.97 |
| UPS Ground shipping*: $11.72 | ||
| *Lower 48 U.S. States | ||
| Top of page |
A
conventional extension ladder is a marvelous tool, but it was not designed
to set up on something round - especially something as small as a utility
pole. Unfortunately, workers in the utility and cable industries are forced
to set their ladders up against poles on a daily basis. It's a dangerous
situation that can easily result in a "kickout".
Enter
the LeveLok Ladder Safety Strap. It's a long, durable webbed polyester strap
with easy-to-use snap rings and cam buckles. The snaps lock around each
side of the ladder (between the 4th and 5th rungs) to provide a secure attachment.
Then the strap is wrapped one full turn around the pole, and both sides
are snugged down, stabilizing the ladder.
With the LeveLok Ladder Safety Strap properly installed, side rail movement is limited to a maximum of 3 inches. And it takes less than a minute to set up!
Each
Ladder Safety Strap includes a nylon mesh storage bag with a Velcro®
closure.
Note: Strap is available in fluorescent orange only.
Quantity pricing available on request.
| Model # | Description | Price |
| LSS-150 | Ladder safety strap | 44.97 |
| UPS Ground shipping*: $9.83 |  |
|
| *Lower 48 U.S. States | ||
| Top of page |
