HEY… DID YOU KNOW that Levelok products meet the recently published, first-of-its-kind, Ladder Accessory Standard in North America, ANSI, A14.8?
Levelok Ladder Leveling Systems meet the recently published ANSI A14.8 Ladder Accessory Standard for Type 1AA, 375 Pound Duty Rated Ladders.
Supreme Extender™ Ladder Leveler w/ Stabilizer Arm (KeyLok® Quick Connect Style) Complete Kit
Kit includes:
- 1 Supreme Extender Leg w/stable arm
- 2 Standard KeyLok Base Units
- 10″ Leveler Leg extension at 3/16″ increments
- 13.5″ Stabilizer Arm – 16″ total side reach
- Install hardware for ladders with rail thickness up to 1/2″
- Installation & Operation Instructions
Now approved for Little Giant “Hyperlite” Type 1A, 300 lb Duty Rated Ladders. See Installation tab below and go to Page 3. NOTE: For installation onto Hyperlite Type 1AA, 375 lb Duty Rated Ladders, please use “Streamline” Quick Connect Leveling System, model LL-QC-3 and LL-STB-3QC.
For standard ladder rails, up to 3/8″ thickness (thickness refers to the Inner Web)
Rail thickness = Ladder Rail Thickness at the middle, or centerline, portion of a ladder rail. Most North American extension, articulating and step ladders, made with aluminum or fiberglass, have a rail thickness of about 1/8″. Wood ladders typically have a rail thickness of about 1-1/4”.
SKU: LL-STB-4SE-2QC For standard ladder rails, up to 1/2″ thickness (thickness refers to the Inner Web) $179.99
Supreme Extender™ Ladder Leveler w/ Stabilizer Arm (KeyLok® Quick Connect Style) – Sold in Singles. (Does “NOT” include QC Base Units)
Kit includes:
1 KeyLok QC Leveler / Stabilizer Leg with built-in Pop-Out Stabilizer Arm
- Attaches to KeyLok Base Units LL-QC-1 and / or LL-QC-3
- This Leveler / Stabilizer is included in model LL-STB-4SE-2QC
Ladder Leveler Stabilizer (KeyLok® Quick Connect Style) Complete Kit
Brand: Levelok
Manufacturer: Levelok
Kit includes:
- 10″ of extension at 3/16″ increments
- 2 Quick Connect Base Units
- 1 Quick Connect Ladder Leveler
- Installation Hardware for ladders with rail thickness of 1/2″ or less
- Installation & Operation Instructions
Now approved for Little Giant “Hyperlite” Type 1A, 300 lb Duty Rated Ladders. See Installation tab below and go to Page 3. NOTE: For installation onto Hyperlite Type 1AA, 375 lb Duty Rated Ladders, please use “Streamline” Quick Connect Leveling System, model LL-QC-3 and LL-STB-3QC.
Ladder Leveler Stabilizer (Streamline KeyLok Style for Fiberglass Ladders Only!) – Complete Kit
Kit includes:
* Fits Fiberglass Ladders only with minimum rail width of 3-5/16″
* Now fits Little Giant “Hyperlite” Extension Ladder, Type 1AA, 375 lb Duty Rated. For more details, click “Installation” tab below and review Page 4 before starting installation procedure. Now approved for “all” Little Giant Hyperlite Ladders. Click “Installation” tab below and follow Instructions page 1-3 for Type 1A Hyperlite, and Page 4 for Type 1AA Hyperlite.
- 2 “Streamline” Quick Connect Base Units
- 1 Quick Connect Ladder Leveler
- Installation Hardware for ladders with rail thickness of 1/4″ or less
- Installation & Operation Instructions
- Leveler provides 10″ of extension at 3/16″increments
Streamline Base Units for KeyLok Leveling System – pairs (Does “NOT” Include Ladder Leveler)
Fits most Fiberglass Extension, Step and Combination Ladders made in the USA and Canada.
For fiberglass ladders only. NOT for use with aluminum ladders.
This product is now available, as a Pre-Installed Accessory, on any Bauer Fiberglass Extension Ladder!
* Now fits Little Giant “Hyperlite” Extension Ladder, Type 1AA, 375 lb Duty Rated. For more details, click “Installation” tab below and review Page 4 before starting installation procedure. Now approved for “all” Little Giant Hyperlite Ladders. Click “Installation” tab below and follow Instructions page 1-3 for Type 1A Hyperlite, and Page 4 for Type 1AA Hyperlite.
Kit includes:
- a pair (2) base units, installation hardware and instructions.
Features:
- Lightweight: Only 3/4 pound per bracket
- Thin: Only 1/2” depth to minimize overall width of ladder
- Tapered at top to protect latch and prevent abrupt interferences
- Installs on fiberglass extension, combination, platform and step ladders
- Enables quick attachment of KeyLok Ladder Levelers
- Approved for ladders up to a Type 1AA, 375 pound duty rating
- Meets all ANSI and OSHA Standards
Ladder Leveler for KeyLok Leveling System – single (Does “NOT” Include Base Units)
Kit includes:
1 Leveler
- Attaches to KeyLok Base Units LL-QC-1 and LL-QC-3
- This Leveler is included in model LL-STB-2QC
Base Units for KeyLok Leveling System – pairs (Does “NOT” Include Ladder Leveler)
Kit includes:
- 2 Quick Connect Base Units
- Installation Hardware
- Installation & Operation Instructions
Now approved for Little Giant “Hyperlite” Type 1A, 300 lb Duty Rated Ladders. See Installation tab below and go to Page 3. NOTE: For installation onto Hyperlite Type 1AA, 375 lb Duty Rated Ladders, please use “Streamline” Quick Connect Leveling System, model LL-QC-3 and LL-STB-3QC.
Shoulder Rest (KeyLok Quick Connect Style) Complete Kit
Kit includes:
- 1 Quick Connect Base Unit
- 1 Quick Connect Shoulder Rest
- Installation Hardware
- Installation & Operation Instructions
Shoulder Rest (KeyLok® Quick Connect Style) Shoulder Rest Only Keylok Base Unit Not Included
Base Units Not Included
- 1 Quick Connect Shoulder Rest
KeyLok Ladder Leveler Conversion Kit
- Keeps the ladder as light as possible while being equipped with a leveling system.
- Converts one pair of permanent mount Levelok ladder levelers into one pair of KeyLok, quick connect levelers
- Kit comes with all hardware, instructions, and one pair of Keylok, quick connect base units for installation on most types of ladders.
- Can be used on extension, articulating, straight, combination, and higher duty rated fiberglass step ladders.
- Recommended for ladders with a duty rating between 225 pounds and 375 pounds.
Base Unit for KeyLok Shoulder Rest (Single)
- 1 Quick Connect Base Unit
- Installation Hardware
- Installation & Operation Instructions
6 Thin Aluminum Spacer Plates
Aluminum Spacer Plate kit for spacing ladder leveler out and away from ladder rail an additional 1/8″. Set of 6 thin aluminum spacer plates. Dimensions: 1/8″ thick x 3/4″w x 2″ long.