$81.99
Kit includes:
1 Leveler
Model LL-STB-1QC
KeyLok® Quick Connect Single Leveler only (for use with Keylok® ladders or LL-QC-1 Base Units, Not included)
NOTE: This model is the same as Werner PK70-3, Louisville LP-2220-02, Gorilla GLL-03.
For more detailed information, visit the Full Kit page here.
Extra Long Mounting Bolt Kit used for mounting base units on thicker ladder rails or to stand base unit out and away from ladder rail by as much as 1-1/4″. Set of 6 extra long, hex drive, mounting bolts: Dimensions: 2″ long x 5/16″ diameter.
Mounting Bolts used for installing Quick Connect Base Units on most standard ladder rails. Set of 6, standard length, hex drive, mounting bolts: Dimensions: 1-1/4” long x 5/16″ diameter.
Aluminum Spacer Plate kit for spacing “base unit” out and away from ladder rail an additional 3/8″ Set of 6 thick aluminum spacer plates. Dimensions: 3/8″ thick x 3/4″w x 2″ long.
Aluminum Spacer Plate kit for spacing ladder leveler out and away from ladder rail an additional 1/8″. Set of 6 thin aluminum spacer plates. Dimensions: 1/8″ thick x 3/4″w x 2″ long.
You can purchase additional shoes for your Levelok Ladder Leveler. Shoes are heavy duty, aircraft aluminum that swivel front to back and side to side. Shoe tread is attached with stainless steel rivets. New, super-high-grip rubber tread is secured with 3 extra-wide fasteners. Each shoe comes with 2 specially positioned holes, enabling a 16d nail to be pushed or driven through. Kit includes one shoe, one bolt, one lock nut, two washers and two black cylindrical spacers. Weight: 5.8 ounces.
Kit includes:
Full Set of installation hardware, enables installation of the QC Base Units onto most ladders. (Ladder rails that are between 1/16” and ¼” in thickness)
Kit includes:
You can purchase additional shoes for your Levelok Ladder Leveler. Shoes are heavy duty, zinc plated steel that swivel front to back and side to side. New, super-high-grip rubber tread is secured with 3 extra-wide fasteners. Each shoe comes with 2 specially positioned holes, enabling a 16d nail to be pushed or driven through. Kit includes one shoe, one bolt, one lock nut, two washers and two black cylindrical spacers. Weight: 13 ounces.
For fiberglass ladders only. NOT for use with aluminum ladders.
This product is now available, as a Pre-Installed Accessory, on any Bauer Fiberglass Extension Ladder!
Kit includes:
Features:
| Weight | 6.7 lbs |
|---|---|
| Dimensions | 21.5 × 7.25 × 3.5 in |
