KeyLok Ladder Leveler Conversion Kit
- Keeps the ladder as light as possible while being equipped with a leveling system.
- Converts one pair of permanent mount Levelok ladder levelers into one pair of KeyLok, quick connect levelers
- Kit comes with all hardware, instructions, and one pair of Keylok, quick connect base units for installation on most types of ladders.
- Can be used on extension, articulating, straight, combination, and higher duty rated fiberglass step ladders.
- Recommended for ladders with a duty rating between 225 pounds and 375 pounds.
Base Unit for KeyLok Shoulder Rest (Single)
- 1 Quick Connect Base Unit
- Installation Hardware
- Installation & Operation Instructions
6 Thin Aluminum Spacer Plates
Aluminum Spacer Plate kit for spacing ladder leveler out and away from ladder rail an additional 1/8″. Set of 6 thin aluminum spacer plates. Dimensions: 1/8″ thick x 3/4″w x 2″ long.
6 Thick Aluminum Spacer Plates
Aluminum Spacer Plate kit for spacing “base unit” out and away from ladder rail an additional 3/8″ Set of 6 thick aluminum spacer plates. Dimensions: 3/8″ thick x 3/4″w x 2″ long.
Aluminum Replacement Shoe For Leveler
You can purchase additional shoes for your Levelok Ladder Leveler. Shoes are heavy duty, aircraft aluminum that swivel front to back and side to side. Shoe tread is attached with stainless steel rivets. New, super-high-grip rubber tread is secured with 3 extra-wide fasteners. Each shoe comes with 2 specially positioned holes, enabling a 16d nail to be pushed or driven through. Kit includes one shoe, one bolt, one lock nut, two washers and two black cylindrical spacers. Weight: 5.8 ounces.
Steel Replacement Shoe For Leveler
You can purchase additional shoes for your Levelok Ladder Leveler. Shoes are heavy duty, zinc plated steel that swivel front to back and side to side. New, super-high-grip rubber tread is secured with 3 extra-wide fasteners. Each shoe comes with 2 specially positioned holes, enabling a 16d nail to be pushed or driven through. Kit includes one shoe, one bolt, one lock nut, two washers and two black cylindrical spacers. Weight: 13 ounces.
6 Extra Long Hex Drive Mounting Bolts
Extra Long Mounting Bolt Kit used for mounting base units on thicker ladder rails or to stand base unit out and away from ladder rail by as much as 1-1/4″. Set of 6 extra long, hex drive, mounting bolts: Dimensions: 2″ long x 5/16″ diameter.
Yellow Nylon Mesh Storage Bag For Ladder Safety Strap
Safety Strap NOT Included
Yellow nylon mesh storage bag with Velcro® closure.
6 Standard Hex Drive Mounting Bolts
Mounting Bolts used for installing Quick Connect Base Units on most standard ladder rails. Set of 6, standard length, hex drive, mounting bolts: Dimensions: 1-1/4” long x 5/16″ diameter.
Complete Mounting Hardware Kit for QC Base Units
Full Set of installation hardware, enables installation of the QC Base Units onto most ladders. (Ladder rails that are between 1/16” and ¼” in thickness)